part # SOLO series

Introducing the patented SOLO latch BlastBag Gasbags

• Solo ONE HAND operation
• Utilises patented horizontal latch
• YOU CHOOSE the speed of Gas Bag before latching
• Our promise - 0% Failures

part # HiFlo series

Improved quality at minimal cost

• New improved valving system 
• Quick and easy to use 
• Robust and durable 
• Incredible sealing and load bearing capacity

part # M-Wheel

MTi Group have been awarded distributorship for the Ruslyn CordWheel.

part # AL series

Economical yet effective

• Excellent for use in hardrock mines 
• Great abrasion resistance 
• Suitable for emulsion and ANFO 
• Fits Easy load dispenser

Part # DL series

The buckles and braces approach

• High tensile polymer with lamination 
• Pre packaged and customised to suit hole dimensions 
• Strongest liner available 
• Suitable for high speed loading

Quick, Easy, Efficient and Effective

• Customised to suit clients application 
• Several partitioned sleeves per roll 
• All heat sealed to keep out water 
• Separate pouch with perforated entry

part #CL series

Speed up your lining practice

• Excellent performance in downhole lining
• Single pass lining and charging operation 
• Line holes up to 115mm with ease 
• Ideal for cracked ground or voids

• The 3X speed tape is available in a 30m and 50m model
• 3:1 Gear mechanism for quick winding
• With dual metric markings on a 12mm ribbon tape, the 3X speed tape is easy to read and durable.
• The ribbon is made from reinforced fiberglass and contains a mylar coating for wear resistance and protection from common chemicals in a blasting environment.
• This is an ideal measure for QA or any D& B dipping activity

• Strong and Durable yet lightweight and easy to use
• Comes in 30m, 50m and 100m lengths
• Non conductive and Dual Marked
• Washable in water

part # 111130

Industry Standard - plastic anvil

• Plastic Anvil 
• Stainless steel blade 
• Excellent for cutting det cord 
• Safety lock

• Non slip coating prevents mud build up
• Flat bottom to assist in finding water level
• Non ferrous

part # ANR-025 (ridgid)  ANSR-019 (semi rigid) 

• Compliant with AS2187.2
• Heavy duty industrial hose 
• Excellent wear and abrasion characteristics 
• Non brittle characteristics, flexable and easy to handle 
• Available in rigid and semi rigid

OP-I-20

Designed to be a permanent fixture on any drill rig or explosives truck is the industry compliant spring return hose reel.

 Part # OP-I-P/DC

The DC Filling Station is a reliable turnkey source of air needed for inflation of Pneufire Airbags. MTi’s complete solution to enable trouble free Inflation.

code

The enclosed Underground system is a durable alternative to the separate hose and inflation baskets. All pneumatics and hose ree...

 Part # SM-D series

An attachment for ALL inflators.

Part # SM-I-1

The hand inflator can be used in both underground and open pit applications. Used predominantly for plugging holes and stemming support the length of the drop line can be customized from 10’ (3m) to 50’ (15m) depending on requirements. The only prerequisite for this solution is air from a nearby source such as an explosive truck or drill rig. MTi Group is also experienced in designing solutions to suit any site requirement.

UG-HR

The Underground Hose Reel is a complete air service unit complete with inflator/deflator for the BlastBall plugs and BlastBag-Aero and includes 40m of Teflon lined thermoplastic hose complete with anodized crimps to indicate depth.

Part # UG-I-P

Fitted with a minsup coupling for universal connection the underground pendent is a compact and durable solution for inflation control. Complete with a regulator, gauge and Swagelok valve housed inside a die-cast impact resistant enclosure, the pendent has a hermetic SS swivel for hose management and is ideally suited to drill rigs or mobile equipment. Can also be used as a compact adaptor for explosive trucks.

Clay markers can be effectively used in the absence of an abundance of rocks and paint or where there are time constraints. Utilising these very cheap markers is a fast and safe way to mark out drill patterns.

Part # DMM-01-W

Mine Marking is a specialised survey spray for underground and above ground mines.

Mine Marking is available in Black, Red, Blue, Green, Yellow, Orange, White, Grey, Fluro Red, Fluro Blue, Fluro Green, Fluro Yellow, Fluro Orange and Fluro Pink, and comes in quantities of 12 per box.

Part # DMS-01-W

Spray & Mark layout paint is a hand held marking paint for inverted use. Fast and convenient, fitted with the original one peice trigger cap.

Spray & Mark is available in Black, Red, Blue, Green, Yellow, Orange, White, Grey, Fluro Red, Fluro Blue, Fluro Green, Fluro Yellow, Fluro Orange, Fluro Pink and Violet, and comes in quantities of 12 per box.

The MTi Group Hole Savers are offered in a range of sizes to accommodate drill holes from 76mm to 450mm. They are excellent for preventing cuttings re entering the holes, saving you time and money on redrill's and giving you a more constant blast.

part # BK100

Prevent redrills and decrease prepping times

• High quality foam 
• Easy to insert 
• Slow release for ease of use 
• Sized to maximise protection

part # SS series

SAVE your column and Emulsion

• Improved retention 
• Easy to install 
• Quick and safe 
• Prevents slumping in wet conditions

part # TB-050

Keep your Explosive where it's most effective

• Easiest of its kind to insert 
• Excellent retention properties from innovative design 
• Made to suit a variety of hole sizes 
• Low cost but excellent result